After we have downloaded the SDK and the Developer Toolkit, it's time for us to install them on the PC and ensure that they can work with the Kinect hardware. Let's perform the following steps:

We chose to set up the SDK software at first so that it will install the motor and camera drivers, the APIs, and the documentations, as well as the toolkit including resources and samples onto the PC. If the operation steps are inversed, that is, the hardware is connected before installing the SDK, your Windows OS may not be able to recognize the device. Just start the SDK setup at this time and the device should be identified again during the installation process.

But before actually using Kinect, you still have to ensure there is nothing between the device and you (the player). And it's best to keep the play space at least 1.8 m wide and about 1.8 m to 3.6 m long from the sensor. If you have more than one Kinect device, don't keep them face-to-face as there may be infrared interference between them.

The depth image at the left in the preceding image shows a human (in fact, the author) standing in front of the camera. Some parts may be totally black if they are too near (often less than 80 cm), or too far (often more than 4 m).

You can read more about the software and hardware setup at:

http://www.microsoft.com/en-us/kinectforwindows/purchase/sensor_setup.aspx