官术网_书友最值得收藏!

Sharpening the Edge

We have now used the Edge (organization and vApp router) a lot, and in some cases, the Edge is too resource-starved to provide a fast service. Let's do something about that.

Getting ready

We will need a deployed Edge, either an organizational Edge or a vApp router. You could use the vApp router out of the Deploying a vApp with vApp router recipe in this chapter.

How to do it...

If you use an organizational Edge, perform the following steps:

  1. Go to your organization.
  2. Click on Administration.
  3. Double-click on the OvDC you created the Edge in.
  4. Select Edge Gateways.
  5. Right-click on the Edge and select Upgrade to Full Configuration.
  6. Answer the warning message and the Edge will now be upgraded.

If you want even more power for the organizational Edge or want to want to give more power to a vApp router:

  1. Log into the vCNS as an Administrator.
  2. Click on Datacenters.
  3. Click on your datacenter.
  4. From the right side, now click on Network Virtualization and then on Edge.
  5. Look at the naming; the Edge you're looking for has the same name as your Organization Network (organizational Edge) or vApp Network (vApp router):
  6. Double-clicking on this Edge will open up all the configuration items.
  7. In the Edge, click on Settings. You should see the following screen:
  8. Click on Actions and select Large (same as Full in vCloud) or X-Large.
  9. The Edge will now be redeployed.

How it works...

We are using vCNS to use all the functions that it is capable of. This will enable you to upsize a vApp router. However, please be aware that VMware will not support this.

In the following table you can see the amount of resources that a given size of an Edge requires:

A huge drawback is that if you redeploy the Edge (or the vApp router), vCloud will make vCNS go back to the original size.

There's more...

Please note that you can also activate HA for a vApp router. You can switch HA on by performing the following steps:

  1. Follow the steps from the previous section.
  2. Click on HA Configuration and select Change. You should see the following screen:
  3. Choose Enable and click on OK.
  4. This will deploy a second Edge device on a different ESXi host. Please be aware of the additional resources used.
主站蜘蛛池模板: 玉门市| 阳春市| 崇阳县| 钟祥市| 金溪县| 即墨市| 达州市| 博客| 津市市| 博湖县| 淄博市| 阳山县| 伽师县| 浮梁县| 台北县| 砚山县| 台南市| 香河县| 花莲市| 海门市| 社旗县| 绵阳市| 武冈市| 闸北区| 呼玛县| 靖州| 渝中区| 偃师市| 阳高县| 黄平县| 台前县| 金堂县| 徐水县| 济源市| 泽普县| 呼图壁县| 灵璧县| 柳林县| 天台县| 凤阳县| 城市|