書名： Microsoft System Center Data Protection Manager Cookbook
作者名： Charbel Nemnom Patrick Lownds
本章字數： 565字
更新時間： 2021-07-02 14:40:01

How to do it...

Make sure that your operating system is fully patched and rebooted before you start the installation. Now follow these steps:

Install the SQL Server instance:
1. Mount the SQL Server 2016 media and then open the Command Prompt (cmd).
2. Browse to the drive letter where SQL Server is mounted.
3. Type in the following command to automate the installation of SQL Server and add all of the required features:

Please make sure to update the domain name and SQL Service accounts in the following command so that they match your environment.

Setup.exe /Q /ACTION=install /IACCEPTSQLSERVERLICENSETERMS /FEATURES=SQLEngine,RS /INSTANCENAME=DPMINSTANCE /INSTANCEDIR="D:\Program Files\Microsoft SQL Server" /INSTALLSHAREDWOWDIR="D:\Program Files (x86)\Microsoft SQL Server" /INSTALLSHAREDDIR="D:\Program Files\Microsoft SQL Server" /SQLSVCACCOUNT=”VIRT\sqldpm” /SQLSYSADMINACCOUNTS=”VIRT\sqldpm” /SQLSVCPASSWORD="dpm2016+1" /RSSVCACCOUNT=”VIRT\sqldpm” /RSSVCPASSWORD="dpm2016+1" /AGTSVCACCOUNT=”VIRT\sqldpm” /AGTSVCPASSWORD="dpm2016+1" /SECURITYMODE=SQL /SAPWD=”dpm2016+1” /SQLTEMPDBDIR=”D:\Program Files\Microsoft SQL Server\TempDB\\” /SQLUSERDBDIR=”D:\Program Files\Microsoft SQL Server\SQLData\\” /SQLUSERDBLOGDIR=”D:\Program Files\Microsoft SQL Server\SQLLog\\”

Please refer to the following screenshot for its output:

1. Make sure that you have downloaded SQL Server Management Studio (SSMS) version 16.5.3 and that you have copied it to the server: http://go.microsoft.com/fwlink/?LinkID=840946.
2. Open the cmd.exe window and type in the following command:

SSMS-Setup-ENU.exe /install /quiet /norestart

Please note that the SSMS installation may take some time to finish.

Install the DPM server:
1. Open a command-line prompt in elevated mode and type in the following command:

dism.exe /Online /Enable-feature /All /FeatureName:Microsoft-Hyper-V /FeatureName:Microsoft-Hyper-V-Management-PowerShell /quiet /norestart

DPM supports Item-Level Recovery ( ILR), which allows you to perform a granular recovery of files, folders, volumes, and virtual hard disks ( VHDXs) from a host-level backup of Hyper-V virtual machines. The Hyper-V Role and PowerShell Management Tools features are required by the DPM server. Please read Chapter 3, Protecting Hyper-V VMs, for more information.

1. Once the Hyper-V role is installed, you need to restart the DPM server before you move on to the next step.
1. Once the DPM server has been restarted, open Notepad, copy the following scripts into it, and then save the file as DPMSetup.ini:

Please note that you can use the same script that follows, regardless of whether the SQL Server instance has been installed on the DPM server or on a remote SQL Server.

[OPTIONS]
 UserName=<Domain-name\Username>
 CompanyName=<Ur-Company>
 ProductKey=XXXX-XXXX-XXXX-XXXX-XXXX
 SqlAccountPassword=<The password for the SQL sa account>
 ProgramFiles = <Location path where you want to install DPM>
 DatabaseFiles = <Location path where you want to install DPMDB>
 IntegratedInstallSource = <Location path where the DPM media is extracted>
 SQLMachineName=<Name of the SQL Server Computer> OR <SQL Cluster Name>
 SQLInstanceName=<Name of the SQL Server instance>
 SQLMachineUserName=<Domain-name\Username> SQLMachinePassword=<Password for the user name Setup must use>
 SQLMachineDomainName=<Domain name to which the SQL Server computer is attached to>
 ReportingMachineName=<Name of the SQL Server Computer> OR <SQL Cluster Name>
 ReportingInstanceName=<Name of the SQL Server instance>
 ReportingMachineUserName=<Domain-name\Username>
 ReportingMachinePassword=<Password for the user name Setup must use>
 ReportingMachineDomainName=<Domain name to which the SQL Server computer is attached to>

1. The following screenshot shows you what the DPMSetup.ini file will look like:

1. After saving the DPMSetup.ini file, in an elevated command prompt on the DPM server, type in the following command and press Enter:

start /wait D:\SCDPM2016\setup.exe /i /f D:\DPMSetup.ini /l D:\dpmlog.txt

The D:\SCDPM2016\ path indicates the media in the DPM location where you'll run setup.exe. D:\DPMSetup.ini is the location path where you saved the DPMSetup.ini file.

1. In just a few minutes, DPM will be installed automatically, as shown in the following screenshot:

Finally, you need to install and update the DPM server to the latest Update Rollup ( UR) if you are using the Long-Term Servicing Channel ( LTSC). At the time of writing this book, DPM 2016 Update Rollup 6 has been released, and you can download it from the following link: https://www.catalog.update.microsoft.com/Search.aspx?q=4456327 .
If you are using the Semi-Annual Channel ( SAC) for DPM (that is, DPM 1801, 1807, 1901, and so on), then the Semi-Annual Channel, with its more frequent release cycle, does not receive update releases.

官术网_书友最值得收藏!

Microsoft System Center Data Protection Manager Cookbook

How to do it...