官术网_书友最值得收藏!

7.2 Installation of Regulating Cock,Exchange Cock and Orifice Plate Box

7.2.1 The regulating cock,exchange cock and orifice plate box shall meet the requirements of design documents,and are installed after pressure test is qualified.

7.2.2 The odd and even number and on/off state of the exchange cock and the indication of the engraved direction shall meet the requirements of design documents.

7.2.3 Gaps of upper and lower positions between exchange cock wrench and cock square head shall not be larger than 0.3mm,and gaps shall not occur on left and lower sides.

7.2.4 The center of the exchange cock shall be on the straight line,and allowable deviation shall be 3.0mm.

7.2.5 The installation of flanges of regulating cock,orifice plate box and exchange cock shall meet the requirements of Code for Construction and Acceptance of Industrial Metallic Piping GB 50235 as current national standard.

主站蜘蛛池模板: 琼中| 蓬莱市| 陈巴尔虎旗| 南平市| 金昌市| 淳安县| 鄂温| 万山特区| 五台县| 新闻| 万山特区| 兰考县| 西青区| 图木舒克市| 玛曲县| 信阳市| 曲周县| 宁南县| 林甸县| 海口市| 贵州省| 湟源县| 四平市| 辉县市| 海晏县| 高碑店市| 吉首市| 镇巴县| 屏东县| 搜索| 辽宁省| 将乐县| 永城市| 淳安县| 双鸭山市| 曲周县| 汾西县| 安图县| 巴彦县| 芦溪县| 庐江县|