- GB50168-2006電氣裝置安裝工程電纜線路施工及驗收規范(英文版)
- 中華人民共和國住房和城鄉建設部
- 358字
- 2020-09-25 15:23:29
2 Terms
2.0.1 Cable
The cable is the part except the accessories like cable connection,termination and so on in the power cable line.
Note:Sometimes cable generally refers to power cable line,that is,the power cable line which is composed by the cable body and the installed accessories.
2.0.2 Metallic sheath
Metallic cover layer in tube shape is sealed evenly and continuously.
2.0.3 Armour
The cover layer composed by the metal belt or metal wire usually protects the cable from the outside mechanic force.
Note:The metal belt protects the cable in radial direction,and the metal wire protects the cable in longitudinal direction.
2.0.4 Termination
The equipment that is installed at the end of the cable to make the cable connecting with other electric facilities or suspended electric line and keeping insulation to the connection point.
2.0.5 Joint
The equipment connects the cables withconductor,insulation,shield layer and protective layer to make the cable system continue.
2.0.6 Cable dividing box,cable feeding pillar
The special electric connecting facilities that complete the collecting and dividing functions of the cable system in electric distribution system,but mostly do not have the secondary assistant configuration like control,measurement and so on.
2.0.7 Cable accessories
General designation of the cable components such as termination,connection,(oil-filled cable)pressure box,crossing interconnection box,grounding box,protection layer protector and so on.
2.0.8 Cable rack
General designation of the equipments for holding and fixing cable after the cable is laid and taken its place,including normal rack and tray.
2.0.9 Cable tray
The continuous stiff structural system to support cable and is composed by the direct line segment and non-direct line segment of thesalver(slot),or ladder bed,accessories,rack,hanger and so on.
2.0.10 Cable ducts,cable conduits
The tube that the cable body laid in for protection and can be dragged out to replace if there is failure.There are structural forms like single tube,row tubes and so on.The cable ducts are also called cable tube.
- 核電廠常規島儀表與控制設計規程
- GB/T 51121-2015 風力發電工程施工與驗收規范
- GB/T 51338-2018 分布式電源并網工程調試與驗收標準
- 配用電通信技術及產業發展報告
- GB 50227-2017 并聯電容器裝置設計規范
- YD/T 5131-2005 移動通信工程鋼塔桅結構設計規范(英文版)
- GB/T50663-2011核電廠工程水文技術規范(英文版)
- GB 50545-2010110kV~750kV架空輸電線路設計規范(英文版)
- GB50439-2015煉鋼工程設計規范(英文版)
- 配電網規劃研究報告內容深度規定
- GB50071-2014小型水力發電站設計規范(英文版)
- GB 50404-2017 硬泡聚氨酯保溫防水工程技術規范
- Rhinoceros三維產品建模及后期處理
- DL 5068-2014 發電廠化學設計規范
- GB50475-2008石油化工全廠性倉庫及堆場設計規范(英文版)