pg最火的电子游戏

6.3　Plate Shears

General item

6.3.1　The allowable installation deviation of crop shear shall be in accordance with those specified in table 6.3.1.

Inspection quantity:total number inspection.

Inspection method:it should be in accordance with those specified in table 6.3.1.

Table 6.3.1　Allowable installation deviation of crop shear

6.3.2　The allowable installation deviation of double-side-shear shall be in accordance with those specified in table 6.3.2.

Inspection quantity:total number inspection.

Inspection method:it should be in accordance with those specified in table 6.3.2.

Table 6.3.2　Allowable installation deviation of double-side-shear

Table 6.3.2（Continued）

6.3.3　The allowable installation deviation of slitting shear shall be in accordance with those specified in table 6.3.3.

Inspection quantity:total number inspection.

Inspection method:it should be in accordance with those specified in table 6.3.3.

Table 6.3.3　Allowable installation deviation of slitting shear

6.3.4　The allowable installation deviation of cut-to-length shear shall be in accordance with those specified in table 6.3.4.

Inspection quantity:total number inspection.

Inspection method:it should be in accordance with those specified in table 6.3.4.

Table 6.3.4　Allowable installation deviation of cut-to-length shear

6.3.5　The allowable installation deviation of rotary shear shall be in accordance with those specified in table 6.3.5.

Inspection quantity:total number inspection.

Inspection method:it should be in accordance with those specified in table 6.3.5.

Table 6.3.5　Allowable installation deviation of rotary shear