- GB 50633-2010(英文版)核電廠工程測量技術規范
- 中華人民共和國住房和城鄉建設部
- 378字
- 2020-09-24 18:19:39
2 Terms,Symbols,and Codes
2.1 Terms
2.1.1 Nuclear power station
A power station in which electricity is generated utilizing the nuclear power released in fission,generally consisting of primary circuit and secondary circuit.
2.1.2 Restricted area
An area with defined boundaries,operated under the effective control of the management personnel of nuclear power station.
2.1.3 Original point of surveying area
Reference point transferred from national or regional horizontal and vertical datum points,serving as the starting point for survey of whole nuclear power station area.Generally it is required where the national or regional datum points are remote from surveying area or inconvenient to use directly.
2.1.4 Primary control network
A set of control networks of required accuracy ratings throughout the nuclear power station site,established based on the original point of surveying area or the national or regional datum points to provide reference for positioning and setting out the buildings or structures and associated components during the early stage of civil construction and establishment of the secondary control network.
2.1.5 Secondary control network
Horizontal and vertical control networks consisting of a number of observation piers around the main power buildings including nuclear island and conventional island,established based on the primary control network to provide reference for positioning and setting out the main buildings or structures in the station,establishing micro-grid control network,monitoring deformations and partially densifying control points after the site ground is leveled.
2.1.6 Micro-grid control network
A small-sized survey control network of high accuracy consisting of a number of survey marks made on the concrete foundation slabs or platforms and the inter-visible penetrations reserved on floor slabs and walls in power buildings including nuclear island and conventional island,established based on the secondary control network to provide reference for determining and checking the positions of buildings or structures and installations,monitoring deformations,and partially densifying control points within power buildings.
2.1.7 Antenna phase center
Electrical center of microwave antenna,theoretically designed to coincide with the antenna's geometric center.
2.1.8 differential global position system
A navigation system which provides improved position accuracy for users by broadcasting DGPS differential corrections via radio beacons,mainly consisting of reference station,broadcast station,monitoring station,and monitor center.
- DL/T 5390-2014 發電廠和變電站照明設計技術規定
- GB50172-2012電氣裝置安裝工程蓄電池施工及驗收規范(英文版)
- GB50542-2009石油化工廠區管線綜合技術規范(英文版)
- GB50629-2010板帶軋鋼工藝設計規范(英文版)
- GB 51135-2015 轉爐煤氣凈化及回收工程技術規范
- SH/T 3096-2012 高硫原油加工裝置設備和管道設計選材導則 (英文版)
- GB 51208-2016 人工制氣廠站設計規范
- GB/T 50312-2016 綜合布線系統工程驗收規范
- GB 50825-2013 鋼鐵廠加熱爐工程質量驗收規范 (英文版)
- 建筑施工技術(中職)
- 計算機自適應語言測試模型設計與效度驗證
- GB 51151-2016 城市軌道交通公共安全防范系統工程技術規范
- 石油化工大型設備吊裝現場地基處理技術標準
- 信息技術標準化指南(第10版)
- GB/T 50744-2011 軋機機械設備安裝規范 (英文版)