- GB 50633-2010(英文版)核電廠工程測量技術規范
- 中華人民共和國住房和城鄉建設部
- 7字
- 2020-09-24 18:19:39
2 Terms,Symbols,and Codes
2.1 Terms
2.1.1 Nuclear power station
A power station in which electricity is generated utilizing the nuclear power released in fission,generally consisting of primary circuit and secondary circuit.
2.1.2 Restricted area
An area with defined boundaries,operated under the effective control of the management personnel of nuclear power station.
2.1.3 Original point of surveying area
Reference point transferred from national or regional horizontal and vertical datum points,serving as the starting point for survey of whole nuclear power station area.Generally it is required where the national or regional datum points are remote from surveying area or inconvenient to use directly.
2.1.4 Primary control network
A set of control networks of required accuracy ratings throughout the nuclear power station site,established based on the original point of surveying area or the national or regional datum points to provide reference for positioning and setting out the buildings or structures and associated components during the early stage of civil construction and establishment of the secondary control network.
2.1.5 Secondary control network
Horizontal and vertical control networks consisting of a number of observation piers around the main power buildings including nuclear island and conventional island,established based on the primary control network to provide reference for positioning and setting out the main buildings or structures in the station,establishing micro-grid control network,monitoring deformations and partially densifying control points after the site ground is leveled.
2.1.6 Micro-grid control network
A small-sized survey control network of high accuracy consisting of a number of survey marks made on the concrete foundation slabs or platforms and the inter-visible penetrations reserved on floor slabs and walls in power buildings including nuclear island and conventional island,established based on the secondary control network to provide reference for determining and checking the positions of buildings or structures and installations,monitoring deformations,and partially densifying control points within power buildings.
2.1.7 Antenna phase center
Electrical center of microwave antenna,theoretically designed to coincide with the antenna's geometric center.
2.1.8 differential global position system
A navigation system which provides improved position accuracy for users by broadcasting DGPS differential corrections via radio beacons,mainly consisting of reference station,broadcast station,monitoring station,and monitor center.
- 產品首版制作
- 設計系統發展研究
- 海上風力發電場勘測標準
- 強夯地基技術規程
- GB50580-2010連鑄工程設計規范(英文版)
- GB 51162-2016 重型結構和設備整體提升技術規范
- SH/T3143-2012石油化工往復壓縮機工程技術規范(英文版)
- GB51105-2015擠壓鋼管工程設備安裝與驗收規范(英文版)
- DL/T 5505-2015 電力應急通信設計技術規程
- Rhinoceros三維產品建模及后期處理
- 中國綠色工業年鑒2020
- GB/T 50619-2010(英文版)火力發電廠海水淡化工程設計規范
- 建筑施工技術(中職)
- GB/T 51116-2016 醫藥工程安全風險評估技術標準
- GB/T 51272-2018 煤炭工業智能化礦井設計標準