官术网_书友最值得收藏!

3.3 Concrete-Filled Steel Tube

3.3.1 The following combinations of steel tube and concrete may be used:

1 Q235 steel matched with concrete of Grade C30-C40;

2 Q345 steel matched with concrete of Grade C40-C60;

3 Q390 steel matched with concrete of Grade C60 or above.

3.3.2 The wall thickness of steel tubes shall not be less than 8 mm.The ratio of the outer diameter D to the wall thickness t of steel tubes should be in the range of 35×(235/fy)-100×(235/fy).The characteristic strength value of steel fy shall comply with the provisions in Table 3.1.3.

3.3.3 The design confinement coefficient of CFST ξ0 should not be less than 0.60.The sectional steel ratio ρc should be in the range of 0.04-0.20.The parameters of ξ0 and ρc shall be calculated by using the following formulae:

img

Where,ξ0——Design confinement coefficient of CFST;

ρc——Sectional steel ratio of CFST;

As——Sectional area of steel tube;

Ac——Sectional area of concrete core;

fs——Design tensile,compressive and flexural strength values of steel;

fcd——Design compressive strength value of concrete.

主站蜘蛛池模板: 新乡县| 滁州市| 道真| 阆中市| 广河县| 榆中县| 鹤岗市| 论坛| 北碚区| 红原县| 武鸣县| 双峰县| 斗六市| 平原县| 乌鲁木齐市| 博客| 阿图什市| 北京市| 郴州市| 维西| 昌邑市| 翁牛特旗| 嘉黎县| 华安县| 措勤县| 靖州| 偃师市| 商洛市| 拜城县| 澄江县| 泊头市| 邵武市| 望谟县| 定西市| 灵丘县| 广灵县| 乌鲁木齐市| 新源县| 松潘县| 娄底市| 抚远县|