- Cisco Unified Communications Manager 8：Expert Administration Cookbook
- Tanner Ezell
- 172字
- 2021-08-06 20:02:46
Configuring transcoders
Transcoders are often necessary for third-party software appliances such as voice mail systems and IVRs. Additionally, when using a low bandwidth codec such as G.729, transcoding will be necessary.
How to do it...
To configure transcoders using IOS devices, perform the following:
- Navigate to the Transcoder page (Media Resources | Transcoder).
- Click on Add New to add a new transcoder.
- Select a Transcoder Type. This selection is determined by the hardware in use.
- Specify the Device Name. This is the name as configured on the IOS device.
- Select an appropriate Device Pool:
- Click on Save.
Once the transcoder is configured on both the IOS device and the Unified Communications Manager, it will show as registered.
Note
For an example configuration for an IOS device see Cisco's Enhanced Transcoding and Conferencing for IOS Voice Gateways in a CallMananger Network using DSP Resources Configuration Example (http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_configuration_example09186a008084fe1f.shtml).
推薦閱讀
- Windows 8實戰從入門到精通
- 大東話安全之網絡病毒篇
- Axure RP 7.0從入門到精通：Web + APP產品經理原型設計
- 走進搜索引擎
- 計算機網絡技術與應用（第2版）
- 巧學巧用Dreamweaver CS6、Flash CS6、Fireworks CS6網站制作
- CSS3網頁設計從入門到精通（微課精編版）
- 網頁設計與制作項目教程（HTML+CSS+Bootstrap）
- PWA實戰：面向下一代的Progressive Web APP
- 深入淺出Vue.js
- Nutanix超融合基礎架構權威指南
- Wireshark網絡分析從入門到實踐
- 信號與信息
- 全棧性能測試修煉寶典：JMeter實戰（第2版）
- Dreamweaver CS6實例教程（第3版）