mg不朽情缘分数怎么算

書名： Object-Oriented JavaScript（Second Edition）
作者名： Stoyan Stefanov Kumar Chetan Sharma
本章字數(shù)： 1243字
更新時間： 2021-08-13 16:19:30

Loops

The if-else and switch statements allow your code to take different paths, as if you're at a crossroad and decide which way to go depending on a condition. Loops, on the other hand, allow your code to take a few roundabouts before merging back into the main road. How many repetitions? That depends on the result of evaluating a condition before (or after) each iteration.

Let's say you are (your program execution is) traveling from A to B. At some point, you reach a place where you evaluate a condition, C. The result of evaluating C tells you if you should go into a loop, L. You make one iteration and arrive at C again. Then, you evaluate the condition once again to see if another iteration is needed. Eventually, you move on your way to B.

An infinite loop is when the condition is always true and your code gets stuck in the loop "forever". This is, of course, a logical error, and you should look out for such scenarios.

In JavaScript, there are four types of loops:

while loops
do-while loops
for loops
for-in loops

While loops

while loops are the simplest type of iteration. They look like this:

var i = 0;
while (i < 10) {
  i++;
}

The while statement is followed by a condition in parentheses and a code block in curly brackets. As long as the condition evaluates to true, the code block is executed over and over again.

Do-while loops

do-while loops are a slight variation of while loops. An example is shown as follows:

var i = 0;
do {
  i++;
} while (i < 10);

Here, the do statement is followed by a code block and a condition after the block. This means that the code block is always executed, at least once, before the condition is evaluated.

If you initialize i to 11 instead of 0 in the last two examples, the code block in the first example (the while loop) will not be executed, and i will still be 11 at the end, while in the second (the do-while loop), the code block will be executed once and i will become 12.

For loops

for is the most widely used type of loop, and you should make sure you're comfortable with this one. It requires just a little bit more in terms of syntax.

In addition to the condition C and the code block L, you have the following:

Initialization—code that is executed before you even enter the loop (marked with 0 in the diagram)
Increment—code that is executed after every iteration (marked with ++ in the diagram)

The most widely used for loop pattern is:

In the initialization part, you define a variable (or set the initial value of an existing variable), most often called i
In the condition part, you compare i to a boundary value, like i < 100
In the increment part, you increase i by 1, like i++

Here's an example:

var punishment = '';
for (var i = 0; i < 100; i++) {
  punishment += 'I will never do this again, ';
}

All three parts (initialization, condition, and increment) can contain multiple expressions separated by commas. Say you want to rewrite the example and define the variable punishment inside the initialization part of the loop:

for (var i = 0, punishment = ''; i < 100; i++) {
  punishment += 'I will never do this again, ';
}

Can you move the body of the loop inside the increment part? Yes, you can, especially as it's a one-liner. This gives you a loop that looks a little awkward, as it has no body. Note that this is just an intellectual exercise; it's not recommended that you write awkward-looking code:

for (
  var i = 0, punishment = '';
  i < 100;
  i++, punishment += 'I will never do this again, ') {

  // nothing here

}

These three parts are all optional. Here's another way of rewriting the same example:

var i = 0, punishment = '';
for (;;) {
  punishment += 'I will never do this again, ';
  if (++i == 100) {
    break;
  }
}

Although the last rewrite works exactly the same way as the original, it's longer and harder to read. It's also possible to achieve the same result by using a while loop. But, for loops make the code tighter and more robust because the mere syntax of the for loop makes you think about the three parts (initialization, condition, and increment), and thus helps you reconfirm your logic and avoid situations such as being stuck in an infinite loop.

The for loops can be nested within each other. Here's an example of a loop that is nested inside another loop and assembles a string containing 10 rows and 10 columns of asterisks. Think of i being the row and j being the column of an "image":

var res = '\n';
for (var i = 0; i < 10; i++) {
  for (var j = 0; j < 10; j++) {
    res += '* ';
  }
  res += '\n';
}

The result is a string like the following:

"
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
* * * * * * * * * * 
"

Here's another example that uses nested loops and a modulo operation to draw a snowflake-like result:

var res = '\n', i, j;
for (i = 1; i <= 7; i++) {
  for (j = 1; j <= 15; j++) {
    res += (i * j) % 8 ? ' ' : '*';
  }
  res += '\n';
}

The result is:

"
 * 
 * * * 
 * 
 * * * * * * * 
 * 
 * * * 
 * 
"

For-in loops

The for-in loop is used to iterate over the elements of an array (or an object, as you'll see later). This is its only use; it cannot be used as a general-purpose repetition mechanism that replaces for or while. Let's see an example of using a for-in to loop through the elements of an array. But, bear in mind that this is for informational purposes only, as for-in is mostly suitable for objects, and the regular for loop should be used for arrays.

In this example, you iterate over all of the elements of an array and print out the index (the key) and the value of each element:

// example for information only
// for-in loops are used for objects
// regular for is better suited for arrays

var a = ['a', 'b', 'c', 'x', 'y', 'z'];

var result = '\n';

for (var i in a) {
  result += 'index: ' + i + ', value: ' + a[i] + '\n';
}