- 3D Printing Blueprints
- Joe Larson
- 202字
- 2021-08-13 16:22:16
Exporting for print
All editing of a model done. The mug isn't placed on the platform it's true, it is just kind of floating in space, but it is properly oriented so the 3D printer software will take care of positioning it. All that is left is to export the model in a format that can be sent to the 3D printer.
With the final mug selected (right-click) and when not in Edit Mode (Tab), carry out the following steps:
- Click on File on the top menu.
- Click on Export on the menu.
- In the menu that pops up click on Stl (.stl).
Note
Standard Tessellation Language (STL) is a file format that is used to describe the geometry of a shape. It doesn't store much else but the shape which is perfect for 3D printing. Almost every 3D printer can use a STL file.
By default the name of the STL will be the name of the project, which is perfect in this case. Just check to be sure the name is as you like it and click on the Export STL button.
Then open either MakerWare or ReplicatorG, open the STL, and prepare it for printing in the usual way.
- Intel FPGA/CPLD設計（基礎篇）
- Mastering Delphi Programming：A Complete Reference Guide
- INSTANT Wijmo Widgets How-to
- BeagleBone By Example
- 計算機組裝·維護與故障排除
- 電腦組裝、維護、維修全能一本通（全彩版）
- Learning Game Physics with Bullet Physics and OpenGL
- 分布式系統與一致性
- 單片機系統設計與開發教程
- 筆記本電腦使用、維護與故障排除從入門到精通（第5版）
- Building 3D Models with modo 701
- Hands-On Deep Learning for Images with TensorFlow
- 基于網絡化教學的項目化單片機應用技術
- 計算機組裝、維護與維修項目教程
- 嵌入式系統原理：基于Arm Cortex-M微控制器體系