- Rapid BeagleBoard Prototyping with MATLAB and Simulink
- Dr. Xuewu Dai Dr.Fei Qin
- 305字
- 2021-07-23 15:48:35
Configuring BeagleBoard
In this section, we will set up the serial and Ethernet connections by continuing the targetupdater process provided by MATLAB and Simulink. Follow these steps to do it:
- Go back to the targetupdater dialog and select the COM port of the RS232-USB connection to the BeagleBoard. As we discussed earlier, the COM port for the BeagleBoard can be found from Windows Device Manager.
- Power on the BeagleBoard by the 5V wall adapter and press the RESET button of the BeagleBoard to reboot. Then click on Next in the targetupdater dialog. When a reset of BeagleBoard is detected, it displays the progress of the booting of the BeagleBoard.
- Configure the IP address of the BeagleBoard. After the BeagleBoard is booted up, you will have a configure board dialog (see the following screenshot). Type in a unique name for the BeagleBoard (for example,
myBBxM-01). Supposing you connect the BeagleBoard and host PC via the Ethernet hub with DHCP services, it is recommended to use dynamic IP address configuration for the BeagleBoard. Here, we select Automatically get IP address and leave the other input boxes as they are. Then click on Configure.
- The targetupdater will set up a serial connection and applies the settings to the BeagleBoard. If you succeed, you will have a confirmation window with the board information (board name, IP address, account name, and password). Make a note of the board information, which will be used for remote login to the BeagleBoard. Click on Next and then on Finish to complete the configuration of the BeagleBoard.
Before the installer exits, you will select if you want to open demos after installation. If you wish, you can check the Launch target demos checkbox and the demo page for BeagleBoard will open. You can select the demo to explore the features of BeagleBoard support packages.
推薦閱讀
- Arduino入門基礎教程
- 極簡Spring Cloud實戰
- Deep Learning with PyTorch
- 現代辦公設備使用與維護
- INSTANT ForgedUI Starter
- Learning Stencyl 3.x Game Development Beginner's Guide
- 筆記本電腦維修實踐教程
- 超大流量分布式系統架構解決方案：人人都是架構師2.0
- 筆記本電腦芯片級維修從入門到精通（圖解版）
- FPGA實驗實訓教程
- 計算機電路基礎（第2版）
- 基于S5PV210處理器的嵌入式開發完全攻略
- Arduino案例實戰（卷Ⅳ）
- Raspberry Pi Media Center
- 3D打印：從全面了解到親手制作（全彩版）