官术网_书友最值得收藏!

首頁 >

SolarWinds Server & Application Monitor：Deployment and Administration

Enabling and configuring SNMP on Windows

Procedures listed in this section will explain how to enable SNMP and then assign a community string, on Windows Server 2008 R2.

Note

All Windows server-related procedures in this book are performed on Windows Server 2008 R2. Procedures vary slightly in other supported versions.

Installing an SNMP service on Windows

This procedure explains how to install the SNMP service on Windows Server 2008 R2.

  1. Log in to a Windows server.
  2. Navigate to Start Menu | Control Panel | Administrative Tools | Server Manager.
    Tip

    In order to see Administrative Tools in the Control Panel, you may need to select View by: Small Icons or Large Icons.

  3. Select Features and click on Add Features.
  4. Check SNMP Services, then click on Next and Install.
  5. Click on Close.

Assigning an SNMP community string on Windows

This procedure explains how to assign a community string on Windows 2008 R2, and ensure that the SNMP service is configured to run automatically on start up.

  1. Log in to a Windows server.
  2. Navigate to Start Menu | Control Panel | Administrative Tools | Services.
  3. Double-click on SNMP Service.
  4. On the General tab, select Automatic under Startup type.
  5. Select the Agent tab and ensure Physical, Applications, Internet, and End-to-end are all checked under the Service area.
  6. Optionally, enter a Contact person and system Location.
  7. Select the Security tab and click on the Add button under Accepted community names.
  8. Enter a Community Name and click on the Add button. For example, we used S4MS3rv3r. We recommend using something secure, as this is a password.
    Note

    Community String and Community Name mean the same thing.

    Tip

    READ ONLY community rights will normally suffice. A detailed explanation of community rights can be found on the author's blog: http://justinmbrant.blogspot.com/

  9. Next, tick the Accept SNMP packets from these hosts radio button.
  10. Click on the Add button underneath the radio buttons and add the IP of the server you have designated as the SolarWinds SAM host.
  11. Once you complete these steps, the SNMP Service Properties Security tab should look something like the following screenshot. Notice that we used 192.168.1.3, as that is the IP of the server where we plan to deploy SolarWinds SAM.
主站蜘蛛池模板： 偏关县| 黑龙江省| 安阳县| 郁南县| 喀什市| 乌鲁木齐市| 霍州市| 三都| 合阳县| 香格里拉县| 洛隆县| 中方县| 霍山县| 墨竹工卡县| 广东省| 灵丘县| 株洲市| 万山特区| 淮南市| 马关县| 虎林市| 永福县| 土默特右旗| 宜兰县| 新郑市| 本溪| 阿拉善盟| 北安市| 临安市| 万山特区| 宜宾市| 盐源县| 长顺县| 沙雅县| 巴马| 建昌县| 泰来县| 永丰县| 祁东县| 阳信县| 平江县|