官术网_书友最值得收藏!

Wheel, motor, and motor clamp design

We have to decide the diameter of the wheel and compute motor requirements. Here, we are giving a typical motor and wheel that we can use if the design is successful:

Motor design of robot

The motor design can vary according to the motor selection; if necessary, this motor can be taken as the design and can change after simulation. The value in the motor diagram can vary according to the speed and torque of the motors. This is the gear assembly of the motor.

The following diagram shows a typical wheel that we can use with a diameter of 90 cm. The wheel with a diameter of 86.5 mm will become 90 mm after placing the grip:

Wheel design of robot

The motors need to be mounted on the base plate. To mount, we need a clamp that can be screwed onto the plate and also connect the motor to the clamp. The following diagram shows a typical clamp that we can use for this purpose. It's an L-shaped clamp with which we can mount the motor on one side and fit another side to the plate:

Typical clamp design of robot

主站蜘蛛池模板: 华亭县| 北辰区| 松阳县| 汉寿县| 开江县| 两当县| 天峻县| 和龙市| 河源市| 赤水市| 通江县| 喜德县| 大冶市| 古田县| 于田县| 清涧县| 莱芜市| 土默特左旗| 万荣县| 息烽县| 三河市| 甘洛县| 成武县| 宁蒗| 习水县| 灌南县| 齐河县| 阿巴嘎旗| 什邡市| 建德市| 绵竹市| 阿荣旗| 丰城市| 宝兴县| 尼玛县| 陵川县| 靖宇县| 中阳县| 固镇县| 长海县| 新田县|