- Internet of Things Projects with ESP32
- Agus Kurniawan
- 136字
- 2021-06-24 16:02:54
Running the program
Now, you can configure your project with the make menuconfig command. You can carry out this task with the blinking project that we looked at in Chapter 1, Getting Started with ESP32.
After our program is flashed into the ESP32 board, we can use a serial program such as PuTTY or CoolTerm. For the demo, I used CoolTerm. You can download this tool from the following link: http://freeware.the-meiers.org.
You can then open a connection to the ESP32 board. If this is successful, you will see our program output on a serial tool. You can see my program output in Figure 2-6:

Figure 2-6: Program output on the CoolTerm serial app
Now that we've configured our sensors to read temperature and humidity, let's look at displaying this information using an LCD.
推薦閱讀
- Raspberry Pi 3 Cookbook for Python Programmers
- 深入淺出SSD:固態存儲核心技術、原理與實戰
- Linux運維之道(第2版)
- 嵌入式技術基礎與實踐(第5版)
- Getting Started with Qt 5
- 深入淺出SSD:固態存儲核心技術、原理與實戰(第2版)
- micro:bit魔法修煉之Mpython初體驗
- AMD FPGA設計優化寶典:面向Vivado/SystemVerilog
- 從零開始學51單片機C語言
- 嵌入式系統中的模擬電路設計
- 分布式系統與一致性
- 筆記本電腦使用、維護與故障排除從入門到精通(第5版)
- 無蘋果不生活:OS X Mountain Lion 隨身寶典
- 筆記本電腦芯片級維修從入門到精通(圖解版)
- 施耐德M241/251可編程序控制器應用技術