官术网_书友最值得收藏!

Foreword

This code is written according to the requirements of Document of JIANBIAOHAN[2008]No.105 issued by The Ministry of Housing and Urban-Rural Development(MOHURD)-Notice on Printing and Distributing the Development and Revision PlanSecond Batchof National Engineering Construction Standards in 2008.This code is developed by China MCC17 Group Company,LTD.with related units authorized by China Metallurgical Construction Association.

In developing this code,the draft group of this code has studied related national laws,regulations and standards,conducted survey and research,summarized the experience of quality acceptance of palletizing equipment installation engineering of many years,discussed and revised the provisions repeatedly,asked for comments from related units and specialists broadly.The draft was finalized through reviewing eventually.

The code consists of 12 chapters and 4 appendixes,covering:General provisions,Terms,Basic requirement,Equipment foundation,anchor bolt and bearing plate,Equipment and materials in site,Mixing and balling equipment installation,Distribution equipment installation engineering,Shaft furnace equipment installation engineering,Traveling grate equipment installation engineering,Grate-Kiln equipment installation engineering,Circular cooler equipment installation engineering and Palletizing mechanical equipment test run.Chapter 6-11 are about division works of palletizing mechanical equipment installation engineering.The provisions of Chapter 4:Equipment foundation,anchor bolt and bearing plate and Chapter 5:Equipment and materials in site are about each subdivision works,and they are the common quality control factors of each subdivision works,therefore they are written in chapters separately.

The provision(s)printed in bold type is(are)mandatory one(ones)and must be implemented strictly.

This code is under the jurisdiction of,and its mandatory provisions are interpreted by Ministry of Housing and Urban-rural Development.The routine management of this code is conducted by China Metallurgical Construction Association,and China MMC17 Group Company,LTD is in charge of the explanation of technical specifications.All relevant organizations are kindly invited to summarize and accumulate actual experiences when implementing this code.Relevant comments and recommendations,whenever necessary,Should be submitted to Technology Department of China MMC17 Group Company,LTD(Address:No.88,Yushan East Road,Maanshan,Anhui Province,Zip Code:243061,E-mail:jszx@mcc17.cn,Fax:0555-2354809)for reference when revising this code in future.

Chief Development Organization,Participating Development Organizations,Chief Drafting Staff and Chief Reviewers of this code are as follows:

Chief Development Organization:

      China MMC17 Group Company,LTD.

Participating Development Organizations:

      Huatian Engineering and Technology Corporation,MMC.

      CMTCC Shanghai Shisanye Construction Company,LTD.

      Anshan Steel Construction Group Company,LTD.

      Henan Coke Ore Equipment Company,LTD.

      Beijing Shougang Construction Group Company,LTD.

Chief Drafting Staff:

      Li Zhongyuan Yin Wanyun Chai WenJie Yu Huachun Pang Zunfu

      Cheng Nianping Zheng Yongheng Wu Zhenhai Li Youcai Gong Jinguo

Chief Reviewers:

      Guo Qijiao Zou Yichang Fan Qinghou Zhang Zhen Zhang Yanhong

      Li Yongfu

主站蜘蛛池模板: 乡宁县| 博爱县| 交城县| 兴隆县| 如皋市| 郁南县| 盖州市| 图片| 九龙县| 渝中区| 分宜县| 镶黄旗| 大埔区| 桐乡市| 涿州市| 剑阁县| 泰宁县| 贡觉县| 和顺县| 汶上县| 镇雄县| 青阳县| 历史| 宿迁市| 江达县| 定西市| 壶关县| 监利县| 平山县| 青阳县| 抚远县| 来安县| 上蔡县| 乌拉特后旗| 清涧县| 汽车| 黑龙江省| 临安市| 新民市| 卓尼县| 汉寿县|